FeNi and Fe16N2 magnets prepared using leaching

Takayuki Kojima, Satoshi Kameoka, Masaki Mizuguchi, Koki Takanashi, An Pang Tsai

Research output: Contribution to journalArticlepeer-review

3 Citations (Scopus)

Abstract

L10-type FeNi alloys and ¡AA-Fe16N2 are candidates for permanent magnets without precious metals, but they are difficult to prepare because atomic diffusion is extremely slow below the orderdisorder transition temperature of L10-FeNi (320°C) and because ¡AA-Fe16N2 is a metastable phase. Here, we report trials for preparing them using leaching, which is a method to obtain porous metals with a high surface area. We used such chemically active porous alloys as precursors for preparing L10-FeNi using the driving force of atomic diffusion and for preparing ¡AA-Fe16N2 using high reactivity with ammonia. No proofs for obtaining the L10-FeNi phase were observed, likely due to an Al impurity of 10 mol% and/or too small of a grain size. An Fe16N2 with ¡AA phase was obtained. Although the saturation magnetization was smaller than that of Fe, a large coercivity (up to 121kAm11) was obtained.

Original languageEnglish
Pages (from-to)1066-1071
Number of pages6
JournalMaterials Transactions
Volume60
Issue number6
DOIs
Publication statusPublished - 2019 Jan 1

Keywords

  • Dealloying
  • Iron nitride
  • Iron-nickel
  • Leaching
  • Magnets
  • Precious metal replacement

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'FeNi and Fe<sub>16</sub>N<sub>2</sub> magnets prepared using leaching'. Together they form a unique fingerprint.

Cite this