Feasibly study on cast-like IFMIF high flux test module

S. Ebara, S. Nagata, H. Irisa, T. Yokomine, A. Shimizu

Research output: Contribution to journalConference articlepeer-review

8 Citations (Scopus)

Abstract

In the high flux test module (HFTM) of the IFMIF, providing the required temperature control using gas-cooling and heater-heating is especially hard because of the restricted space in the very small irradiation volume of about 0.51. We have proposed an alternative design for the HFTM housing cast-like capsules. Studies of the HFTM have so far proceeded on the assumption of constant nuclear heating. Since the actual thermal control for irradiated specimens in the HFTM must be achieved with nuclear heating that has a spatially nonuniform profile, the thermal behavior of the specimens under nonuniform heating must be investigated. In this study, we described results of heat transfer experiments performed with nonuniform heating profiles and of numerical thermal-hydraulic analysis done to estimate the heater power required to achieve certain temperature levels.

Original languageEnglish
Pages (from-to)887-891
Number of pages5
JournalFusion Engineering and Design
Volume81
Issue number8-14 PART B
DOIs
Publication statusPublished - 2006 Feb
Externally publishedYes
EventProceedings of the Seventh International Symposium on Fusion Nuclear Technology ISFNT-7 Part B -
Duration: 2005 May 222005 May 27

Keywords

  • Gas cooling
  • High flux test module
  • IFMIF
  • Temperature control

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Nuclear Energy and Engineering
  • Materials Science(all)
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Feasibly study on cast-like IFMIF high flux test module'. Together they form a unique fingerprint.

Cite this