Fabrication technology of ruthenium microelectrode pattern for RF MEMS

Takeshi Matsumura, Masayoshi Esashi, Hiroshi Harada, Shuji Tanaka

Research output: Contribution to journalArticle

Abstract

Ruthenium (Ru), which is one of noble metals, has been intensively considered as an electrode material of DRAM capacitors, since Ru has high oxidation resistance and high electrical conductivity even in the oxidized state. Furthermore, Ru is also expected to be used as an electrode material of acoustic devices, e.g. FBAR, because of its superior acoustic properties such as high Young's modulus and density. For such applications, a precise etching technique for Ru microelectrode patterns is required. Ru etching proceeds by producing volatile oxidized Ru (RuO4), and is possible using plasma with O2 or O2 plus halogenous gas, e.g. Cl2 and CF4. However, the plasma etching also attacks resist and/or an underlayer of Si, SiN etc. In this study, a wet etching process with cerium (IV) ammonium nitrate (CAN)-based etchant and a dry etching process with O 3 gas were investigated as low-damage Ru etching processes. O 3 gas etching is better for patterning Ru microelectrodes than CAN-based wet etching. For O3 gas etching, diluted HF pretreatment is effective to reduce side etching and to improve etching uniformity.

Original languageEnglish
Pages (from-to)71-76
Number of pages6
JournalIEEJ Transactions on Sensors and Micromachines
Volume132
Issue number4
DOIs
Publication statusPublished - 2012

Keywords

  • Cerium (IV) ammonium nitrate
  • Etching
  • RF MEMS
  • Ruthenium

ASJC Scopus subject areas

  • Mechanical Engineering
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Fabrication technology of ruthenium microelectrode pattern for RF MEMS'. Together they form a unique fingerprint.

  • Cite this