Fabrication of Ti/SuS/Mo Functionally Graded Material by Slurry Dipping Process

Daisuke Miyake, Hidekazu Tomaru, Satoshi Takagi, Akira Kawasaki, Ryuzo Watanabe

Research output: Contribution to journalArticlepeer-review

3 Citations (Scopus)

Abstract

Molybdenum/stainless steel/titanium functionally graded materials (FGM), which will be used as long life cladding tubes in a fast breeder reactor, have been fabricated by slurry dipping and sintering process, emphasizing the increase in corrosion resistance to liquid sodium and fission products. Slurries of different compositions were prepared by mixing the appropriate amount of Mo, SUS304 and Ti powders in water with polyvinyl alcohol. Cylindrical substrates were formed by die pressing of stainless steel and alumina powders. The substrates were dipped in the slurry to coat the surface subsequently dried in air and debinded in Ar. They were encapsulated in Pyrex glass tubes and then HIPed 2h at 1050°C at a pressure of 200MPa. The microstructural observation in the cross section of the sintered compacts has revealed that the dipped layers were formed, in which no defects such as small cracks and residual pores were observed. Some intermetallic compounds were observed in the FGM layer as detected by EPMA.

Original languageEnglish
Pages (from-to)1367-1372
Number of pages6
Journaljournal of the japan society of powder and powder metallurgy
Volume42
Issue number12
DOIs
Publication statusPublished - 1995

Keywords

  • fast breeder reactor
  • functionally graded material
  • heat resistance
  • nuclear fuel tube
  • slurry technology

ASJC Scopus subject areas

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Fabrication of Ti/SuS/Mo Functionally Graded Material by Slurry Dipping Process'. Together they form a unique fingerprint.

Cite this