Fabrication of porous hydroxyapatite using hydrothermal hot pressing and post-sintering

A. Nakahira, T. Murakami, T. Onoki, Toshiyuki Hashida, K. Hosoi

Research output: Contribution to journalArticle

28 Citations (Scopus)

Abstract

In the present study, a hydrothermal hot pressing (HHP) method was used to fabricate porous hydroxyapatites with high strength. In particular, an interconnected matrix of hydroxyapatite was achieved by solution precipitation and the application of compressive stress during HHP. Hydroxyapatite samples post-sintered after this HHP treatment had a lower relative density and higher open porosity than those prepared by normal sintering. An examination of the pore characteristics suggested that the samples after HHP treatment and post-sintering had a high amount of open pores with a large and round morphology, whereas the samples prepared by normal sintering showed a denser microstructure, with a sharp-edged-pore morphology.

Original languageEnglish
Pages (from-to)1334-1336
Number of pages3
JournalJournal of the American Ceramic Society
Volume88
Issue number5
DOIs
Publication statusPublished - 2005 May 1

ASJC Scopus subject areas

  • Ceramics and Composites
  • Geology
  • Geochemistry and Petrology
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Fabrication of porous hydroxyapatite using hydrothermal hot pressing and post-sintering'. Together they form a unique fingerprint.

  • Cite this