Fabrication of large area diffraction grating using LIGA process

Daiji Noda, Makoto Tanaka, Kazuma Shimada, Wataru Yashiro, Atsushi Momose, Tadashi Hattori

Research output: Contribution to journalArticlepeer-review

53 Citations (Scopus)

Abstract

X-ray imaging is a very important technology in the fields of medical, biological, inspection, material science, etc. However, it is not enough to get the clear X-ray imaging with low absorbance. We have produced a diffraction gratings for obtaining high resolution X-ray phase imaging, such as X-ray Talbot interferometer. In this X-ray Talbot interferometer, diffraction gratings were required to have a fine, high accuracy, high aspect ratio structure. Then, we succeeded to fabricate a high aspect ratio diffraction grating with a pitch of 8 μm and small area using a deep X-ray lithography technique. We discuss that the diffraction gratings having a narrow pitch and an large effective area to obtain imaging size of practical use in medical application. If the pitch of diffraction gratings were narrow, it is expected high resolution imaging for X-ray Talbot interferometer. We succeeded and fabricated the diffraction grating with pitch of 5.3 μm, Au height of 28 μm and an effective area of 60 × 60 mm2.

Original languageEnglish
Pages (from-to)1311-1315
Number of pages5
JournalMicrosystem Technologies
Volume14
Issue number9-11
DOIs
Publication statusPublished - 2008 Oct
Externally publishedYes

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Hardware and Architecture
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Fabrication of large area diffraction grating using LIGA process'. Together they form a unique fingerprint.

Cite this