Fabrication of high-magnetoresistance tunnel junctions using Co75Fe25 ferromagnetic electrodes

Xiu Feng Han, Mikihiko Oogane, Hitoshi Kubota, Yasuo Ando, Terunobu Miyazaki

Research output: Contribution to journalArticle

106 Citations (Scopus)

Abstract

Temperature dependence of tunnel magnetoresistance (TMR) ratio, resistance, and coercivity from 4.2 K to room temperature and applied voltage dependence of the TMR ratio and resistance at room temperature for a tunnel junction, Ta (5 nm)/Ni79Fe21 (3 nm)/Cu (20nm)/Ni79Fe21 (3 nm)/Ir22Mn78 (10nm)/Co75Fe25 (4 nm)/Al (0.8nm)-oxide/Co75Fe25 (4 nm)/Ni79Fe21 (20 nm)/Ta(5 nm), were investigated. TMR ratio, effective harrier height and width, and breakdown voltage of the junction can be remarkably enhanced after annealing at 300°C for an hour. High TMR ratio of 49.7% at room temperature and 69.1% at 4.2 K were observed. The value of spin polarization of Co75Fe25, P = 50.7%, deduced from the TMR ratio at 4.2 K was corresponding well to the experimental data measured at 0.2 K in a spin polarized tunneling experiment using a superconductor/insulator/ ferromagnet tunneling junction.

Original languageEnglish
Pages (from-to)283-285
Number of pages3
JournalApplied Physics Letters
Volume77
Issue number2
DOIs
Publication statusPublished - 2000 Jul 10

ASJC Scopus subject areas

  • Physics and Astronomy (miscellaneous)

Fingerprint Dive into the research topics of 'Fabrication of high-magnetoresistance tunnel junctions using Co<sub>75</sub>Fe<sub>25</sub> ferromagnetic electrodes'. Together they form a unique fingerprint.

  • Cite this