Fabrication of a planar solid oxide fuel cell

M. Dokiya, N. Sakai, T. Kawada, H. Yokokawa, T. Iwata, M. Mori

Research output: Contribution to journalConference article

5 Citations (Scopus)

Abstract

The authors summarize the results of a recent study on solid oxide fuel cells (SOFCs). Emphasis is placed on the development of new sinterable lanthanum chromite for the separator and the development of a method for fabricating a planar SOFC by the inexpensive tape casting method. It is found that chromium-poor calcium-doped lanthanum chromite can be formed into a dense gas-tight plate by sintering doctor blade films above 1720 K in air. Composite plates are cofired from green foam membranes of distributors and dense green films of electrolyte or separator.

Original languageEnglish
Pages (from-to)1547-1551
Number of pages5
JournalProceedings of the Intersociety Energy Conversion Engineering Conference
Volume3
Publication statusPublished - 1989 Dec 1
Externally publishedYes
EventProceedings of the 24th Intersociety Energy Conversion Engineering Conference - IECEC-89. Part 1 (of 6): Aerospace Power Systems and Power Conditioning - Washington, DC, USA
Duration: 1989 Aug 61989 Aug 11

ASJC Scopus subject areas

  • Fuel Technology
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Fabrication of a planar solid oxide fuel cell'. Together they form a unique fingerprint.

  • Cite this