Fabrication and wear properties of Fe3Al-based composites

T. Itoi, S. Mineta, H. Kimura, Kyosuke Yoshimi, M. Hirohashi

Research output: Contribution to journalArticlepeer-review

21 Citations (Scopus)

Abstract

Microstructures and wear properties of a recycled Fe3Al-based alloy made from high-carbon Cr steel sludge and Al can scraps were first investigated in this study. The alloy was composed of D03-type Fe3Al matrix and Fe3AlC0.5 dispersions (κ phase). Carbon in the steel sludge and Al can scraps contributes to the formation of the K phase. Next, the recycled Fe3Al-based composites reinforced by transition metal carbides (TMC = TiC, NbC, V4C 3, and ZrC) were fabricated by in-situ reactions between transition metals (TM = Ti, Nb, V, and Zr) and carbon when these transition metals are added to the molten Fe3Al-based alloy. The (Fe, Al)2Nb intermetallic compound and a Fe-Al-Zr-C carbide are also formed in the Nb- and Zr-added Fe3Al-based composites with NbC and ZrC, respectively. The Vickers hardness values of the recycled Fe3Al-based composites reinforced by TMC were higher than that reinforced only by the κ phase. Abrasive wear behavior is observed for these composites. The carbides of the κ phase, TiC, NbC, V4C3 and ZrC are still embedded in the matrix after abrasive wear without delamination or destruction. This result indicates that the carbides significantly affect the wear resistance of these composites. The wear resistance of the composites reinforced by TMCs is higher than that reinforced by the κ phase. Moreover, the wear resistance of the recycled Fe3Al-based composites reinforced by TiC is much higher than that of gray cast iron; the former value is comparable to that of high-carbon Cr steels. Thus, carbon in the steel sludge and Al can scraps is useful to synthesize hard carbides with transition metals. We have succeeded in preparing the valuable recycled Fe3Al-based composites with excellent wear resistance from the industrial steel and Al scraps.

Original languageEnglish
Pages (from-to)2169-2177
Number of pages9
JournalIntermetallics
Volume18
Issue number11
DOIs
Publication statusPublished - 2010 Jan 1

Keywords

  • A. Iron-aluminide
  • B. Wear property
  • C. Carbide
  • C. Recycle

ASJC Scopus subject areas

  • Chemistry(all)
  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Fabrication and wear properties of Fe<sub>3</sub>Al-based composites'. Together they form a unique fingerprint.

Cite this