Experimental studies of a thermoacoustic Stirling prime mover and its application to a cooler

Y. Ueda, T. Biwa, U. Mizutani, T. Yazaki

Research output: Contribution to journalArticle

90 Citations (Scopus)

Abstract

An acoustic field spontaneously induced in a thermoacoustic prime mover consisting of a looped tube and resonator is determined through simultaneously measurements of pressure P and velocity U. A thermal efficiency of the thermoacoustic prime mover of this type has been reported to reach 30%. The measurements of the acoustic field in the present system revealed that a phase lead of U relative to P takes a negative value of about -20° in the regenerator where the output power of the prime mover is generated. It was concluded that the possession of a negative phase lead at this position is taken as a clue in a significant increase in the output power. Moreover, the analysis in the thermoacoustic mechanism shows that a precise position for the location of a second regenerator acting as a heat pump exists in the looped tube. Indeed, by locating the second regenerator at the position, a thermoacoustic cooler was constructed. The thermoacoustic cooler could generate a low temperature of -25°C without involving any moving parts.

Original languageEnglish
Pages (from-to)1134-1141
Number of pages8
JournalJournal of the Acoustical Society of America
Volume115
Issue number3
DOIs
Publication statusPublished - 2004 Mar 1
Externally publishedYes

ASJC Scopus subject areas

  • Arts and Humanities (miscellaneous)
  • Acoustics and Ultrasonics

Fingerprint Dive into the research topics of 'Experimental studies of a thermoacoustic Stirling prime mover and its application to a cooler'. Together they form a unique fingerprint.

  • Cite this