Experimental estimation of strain rate during FSW of al-alloy using plane-strain compression

Kunitaka Masaki, Yutaka S. Sato, Masakatsu Maeda, Hiroyuki Kokawa

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

Friction stir welding (FSW) makes the stir zone with fine recrystallized grain structure. The recrystallized grains would be formed through dynamic recrystallization at high temperatures and high strain-rate. The present study experimentally simulated the dynamically recrystallized microstructure of a friction stir welded Al alloy 1050 produced at 600 rpm rotation and 100 mm/min travel speed, using combination of the plane-strain compression at various strain rates and the subsequent cooling along the cooling cycle of FSW. The equiaxed grain structures similar to the microstructure of the stir zone were produced at strain rates between 0.1 and 32 s-1; the grain size decreased with increasing strain rate. Strain rate during the FSW could be estimated to be about 1.8 s-1. The present study suggests that plane-strain compression test can simulate the recrystallized grain structure of the friction stir welds.

Original languageEnglish
Title of host publicationMaterials Science Forum - Advanced Welding and Micro Joining/Packaging for the 21st Century - Selected peer reviewed papers from the International Welding/Joining Conference-Korea 2007, IWJC 2007
EditorsChang Hee Lee, Jong-Bong Lee, Jong-Bong Lee, Dong-Hwan Park, Suck-Joo Na
PublisherTrans Tech Publications Ltd
Pages299-302
Number of pages4
ISBN (Electronic)978-0-87849-360-9
DOIs
Publication statusPublished - 2008
EventInternational Welding/Joining Conference-Korea 2007, IWJC 2007 - Seoul, Korea, Republic of
Duration: 2007 May 102007 May 12

Publication series

NameMaterials Science Forum
Volume580-582
ISSN (Print)0255-5476
ISSN (Electronic)1662-9752

Other

OtherInternational Welding/Joining Conference-Korea 2007, IWJC 2007
CountryKorea, Republic of
CitySeoul
Period07/5/1007/5/12

Keywords

  • Al alloy
  • Friction stir welding
  • Plane-strain compression test
  • Strain rate

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Experimental estimation of strain rate during FSW of al-alloy using plane-strain compression'. Together they form a unique fingerprint.

Cite this