Experimental and theoretical study of the effect of Si on the oxidative behavior of Ti-6Al-4V alloys

Kodai Maeda, Satoshi Suzuki, Kyosuke Ueda, Tomonori Kitashima, Somesh Kr Bhattacharya, Ryoji Sahara, Takayuki Narushima

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

This paper reports the first study of the oxidative behavior of Si-containing Ti-6Al-4V alloys in air. The alloys were studied in the temperature range 910–1210 K for a maximum period of 518.4 ks, and their tensile properties at room temperature are reported. The addition of Si decreased the total mass gain during oxidation and enlarged the region in which the mass gain obeyed the parabolic rate law. The oxide scale mainly consisted of rutile and α-Al2O3 phases. The results of the XPS analysis suggest that in rutile, Si exists as both Si4+ ions and SiO2. First-principles calculations indicated that Si4+ ions stably dissolved into the interstitial sites in rutile, which suppresses oxygen migration through rutile by decreasing the number of oxygen vacancies, thereby inhibiting oxide scale formation. The reaction layer consisting of Ti3Al and α″ phases on Ti-1mass% Si alloy suppressed the dissolution of oxygen into the substrate, i.e., α-case formation. The ratio of mass gain in α-case formation to total mass gain during oxidation at 1010 K and 1110 K ranged from 0.077 to 0.42. The addition of Si to the Ti-6Al-4V alloy was effective in improving both its oxidative resistance and tensile strength.

Original languageEnglish
Pages (from-to)519-528
Number of pages10
JournalJournal of Alloys and Compounds
Volume776
DOIs
Publication statusPublished - 2019 Mar 5

Keywords

  • Alpha case
  • First-principles calculation
  • Oxygen dissolution
  • Rutile
  • Tensile property
  • Thermal oxidation

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Experimental and theoretical study of the effect of Si on the oxidative behavior of Ti-6Al-4V alloys'. Together they form a unique fingerprint.

  • Cite this