Evolution Process of <100> Texture in Fe-Cr-Co-Mo Permanent Magnets

S. Sugimoto, M. Okada, M. Homma, H. Satoh

Research output: Contribution to journalArticle

17 Citations (Scopus)

Abstract

The present work describes the process of grain growth during secondary recrystallization, which develops the <100> texture in Fe-Cr-Co-Mo hard magnets. The secondary recrystallization was caused by heat-treating the alloys in the sequence of α, α + γ, α + γ + σ, α phase regions of Fe-Cr-Co-Mo alloys (HTSR). This heat treatment results in the development of {110}<110> textures with <100> directions aligned along the transverse direction (TD) of cold-rolled strips. The process of grain growth during secondary recrystallization can be considered as follows: (1) y and σ phases precipitate along grain boundaries and within grains by the heat treatment in α + γ and α + γ + σ region in HTSR. It results in refining the σ grains and increasing the interfacial energy of α grains. (2) the precipitated γ phase inhibits the normal grain growth of α phase and thus maintains the driving energy for secondary recrystallization. But the volume fraction of y phase decreases with increasing temperature during the last heat treatment of HTSR in α phase region. It results that the pinning effect of γ phase decreases and secondary recrystallization occurs.

Original languageEnglish
Pages (from-to)557-561
Number of pages5
JournalMaterials Transactions, JIM
Volume32
Issue number6
DOIs
Publication statusPublished - 1991 Jan 1

Keywords

  • <100> texture
  • cold-rolling
  • grain growth
  • iron-chromium-cobalt-molybdenum permanent magnets
  • phase region
  • pinning effect
  • secondary recrystallization

ASJC Scopus subject areas

  • Engineering(all)

Fingerprint Dive into the research topics of 'Evolution Process of <100> Texture in Fe-Cr-Co-Mo Permanent Magnets'. Together they form a unique fingerprint.

  • Cite this