Evaluation of friction properties in polished polycrystalline diamond films on steel substrates

Atsushi Tsutsui, Hiroyuki Miki, Takanori Takeno, Toshiyuki Takagi

Research output: Contribution to journalArticle

Abstract

CVD diamond films are expected to become a solid lubricant coating without any maintenance. However, substrates on which diamond film can be deposited are limited to silicon, tungsten carbides (TiC) and so forth. If diamond films can be deposited onto steel substrates, possible applications will increase in number. In this study, diamond film was deposited on a steel substrate with an interlayer and was partly polished. Tungsten and titanium were selected as materials for an interlayer between the diamond film and the SUS 440 C substrate. In a friction test, low and stable friction coefficients were obtained between the pair of diamond film and SKD 11 pin, with a friction coefficient of 0.1 in the steady-state regime. The diamond films on steel substrates show good friction properties similar to conventional diamond films on TiC substrates. Therefore, diamond films on steel substrates prove useful in obtaining solid lubrication films for sliders.

Original languageEnglish
Pages (from-to)1639-1644
Number of pages6
JournalNihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
Volume76
Issue number766
DOIs
Publication statusPublished - 2010 Jun

Keywords

  • Diamond film
  • Friction
  • Interlayer
  • Stainless steel

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Fingerprint Dive into the research topics of 'Evaluation of friction properties in polished polycrystalline diamond films on steel substrates'. Together they form a unique fingerprint.

  • Cite this