Estimation of thermal stress in lump coke

Hiroshi Sato, Hideyuki Aoki, Takatoshi Miura, John W. Patrick

Research output: Contribution to journalArticlepeer-review

18 Citations (Scopus)

Abstract

Permeability in the blast furnace is maintained by lump coke and is governed by the mean size and size distribution of the coke. Coke lump size is determined mainly by the growth of macro-cracks from the wall side to the centre of the coke oven charge, their formation behaviour depending on the property of the coal charged and the operating conditions. In the formation process, micro-cracks are simultaneously formed in all directions and their formation also plays a part in determining the strength and therefore the lump size of coke for the blast furnace. This study estimates the deformation behaviour of coke and the thermal stress distribution by assuming the size of lump coke formed in the coke oven (distance between macro-cracks) and the conditions required for fissure propagation, considering radiative heat transfer within the fissures. The tensile stress parallel to the oven wall is estimated to reach ∼ 10-20 MPa near the wall side. The growth of fissures arising from the wall side is successfully estimated. No fissure parallel to the oven wall is recognized, since only compressive stress is predicted.

Original languageEnglish
Pages (from-to)303-310
Number of pages8
JournalFuel
Volume76
Issue number4
DOIs
Publication statusPublished - 1997 Mar

Keywords

  • Coke formation
  • Fissuring
  • Thermal stress

ASJC Scopus subject areas

  • Chemical Engineering(all)
  • Fuel Technology
  • Energy Engineering and Power Technology
  • Organic Chemistry

Fingerprint Dive into the research topics of 'Estimation of thermal stress in lump coke'. Together they form a unique fingerprint.

Cite this