Estimation of enthalpy effects in direct-connect dual-mode combustor

Junji Noda, Sadatake Tomioka, Muneo Izumikawa, C. P. Goyne, R. D. Rockwell, Goro Masuya

Research output: Contribution to journalArticlepeer-review

11 Citations (Scopus)

Abstract

To estimate the enthalpy effects of test gas in a direct-connect dual-mode combustor, an experimental study was conducted. Wall pressures were compared under two cases with different types of air heater (combustion heater and electric heater) at various H2 fuel equivalence ratios. Considering flame holding, dual-mode transition and wall pressure value, matching total enthalpy was found to be more effective than matching total temperature in terms of mitigating vitiation effects in the case of a combustion heater. On the other hand, for vitiation flow, matching total temperature is more effective than matching total enthalpy for ignition to duplicate that of clean air flow. Therefore, flow total condition (total temperature or total enthalpy) should be selected according to experimental candidates.

Original languageEnglish
Pages (from-to)289-296
Number of pages8
JournalJournal of Thermal Science and Technology
Volume6
Issue number2
DOIs
Publication statusPublished - 2011

Keywords

  • Dual-mode combustion
  • Enthalpy effects
  • Ground testing
  • Supersonic combustion ramjet engine
  • Thermal choke

ASJC Scopus subject areas

  • Atomic and Molecular Physics, and Optics
  • Materials Science(all)
  • Instrumentation
  • Engineering (miscellaneous)

Fingerprint Dive into the research topics of 'Estimation of enthalpy effects in direct-connect dual-mode combustor'. Together they form a unique fingerprint.

Cite this