Equipment and Procedure Description

Aitor Llano-Torre; Sergio H.P. Cavalaro; Wolfgang Kusterle; Sandro Moro; Raúl L. Zerbino; Ravindra Gettu; Hans Pauwels; Tomoya Nishiwaki; Benoît Parmentier; Nicola Buratti; Romildo D. Toledo Filho; Jean Philippe Charron; Catherine Larive; William P. Boshoff; E. Stefan Bernard; Michael Kompatscher

doi:10.1007/978-3-030-72736-9_5

Equipment and Procedure Description

Aitor Llano-Torre, Sergio H.P. Cavalaro, Wolfgang Kusterle, Sandro Moro, Raúl L. Zerbino, Ravindra Gettu, Hans Pauwels, Tomoya Nishiwaki, Benoît Parmentier, Nicola Buratti, Romildo D. Toledo Filho, Jean Philippe Charron, Catherine Larive, William P. Boshoff, E. Stefan Bernard, Michael Kompatscher

ENG - Architecture and Building Science

Research output: Chapter in Book/Report/Conference proceeding › Chapter

Abstract

This chapter collects the description of the main creep testing procedures in fibre-reinforced concrete (FRC) as well as the equipment used by each participant laboratory in the round-robin test (RRT). The description of each procedure was directly provided by the participants and follows the same structure for each participant where institution identification and contact information was included. Each participant summarised the most significant data such as specimen’s size, load configuration, parameters or environmental conditions in a quite useful table. Moreover, the participants included description and close-up pictures of the creep frames construction, the support boundary conditions, and the measurement devices used. Finally, the participants provided a complete description of the specific complete creep test procedure followed.

Original language	English
Title of host publication	RILEM State-of-the-Art Reports
Publisher	Springer Science and Business Media B.V.
Pages	47-117
Number of pages	71
DOIs	https://doi.org/10.1007/978-3-030-72736-9_5
Publication status	Published - 2021

Publication series

Name	RILEM State-of-the-Art Reports
Volume	34
ISSN (Print)	2213-204X
ISSN (Electronic)	2213-2031

ASJC Scopus subject areas

Civil and Structural Engineering
Building and Construction
Materials Science (miscellaneous)

Access to Document

10.1007/978-3-030-72736-9_5

Cite this

Llano-Torre, A., Cavalaro, S. H. P., Kusterle, W., Moro, S., Zerbino, R. L., Gettu, R., Pauwels, H., Nishiwaki, T., Parmentier, B., Buratti, N., Toledo Filho, R. D., Charron, J. P., Larive, C., Boshoff, W. P., Bernard, E. S., & Kompatscher, M. (2021). Equipment and Procedure Description. In RILEM State-of-the-Art Reports (pp. 47-117). (RILEM State-of-the-Art Reports; Vol. 34). Springer Science and Business Media B.V.. https://doi.org/10.1007/978-3-030-72736-9_5

Llano-Torre, A, Cavalaro, SHP, Kusterle, W, Moro, S, Zerbino, RL, Gettu, R, Pauwels, H, Nishiwaki, T, Parmentier, B, Buratti, N, Toledo Filho, RD, Charron, JP, Larive, C, Boshoff, WP, Bernard, ES & Kompatscher, M 2021, Equipment and Procedure Description. in RILEM State-of-the-Art Reports. RILEM State-of-the-Art Reports, vol. 34, Springer Science and Business Media B.V., pp. 47-117. https://doi.org/10.1007/978-3-030-72736-9_5

@inbook{038a9bf1be934ce6af30e6a0f8e2f30e,

title = "Equipment and Procedure Description",

abstract = "This chapter collects the description of the main creep testing procedures in fibre-reinforced concrete (FRC) as well as the equipment used by each participant laboratory in the round-robin test (RRT). The description of each procedure was directly provided by the participants and follows the same structure for each participant where institution identification and contact information was included. Each participant summarised the most significant data such as specimen{\textquoteright}s size, load configuration, parameters or environmental conditions in a quite useful table. Moreover, the participants included description and close-up pictures of the creep frames construction, the support boundary conditions, and the measurement devices used. Finally, the participants provided a complete description of the specific complete creep test procedure followed.",

author = "Aitor Llano-Torre and Cavalaro, {Sergio H.P.} and Wolfgang Kusterle and Sandro Moro and Zerbino, {Ra{\'u}l L.} and Ravindra Gettu and Hans Pauwels and Tomoya Nishiwaki and Beno{\^i}t Parmentier and Nicola Buratti and {Toledo Filho}, {Romildo D.} and Charron, {Jean Philippe} and Catherine Larive and Boshoff, {William P.} and Bernard, {E. Stefan} and Michael Kompatscher",

note = "Publisher Copyright: {\textcopyright} 2021, RILEM.",

year = "2021",

doi = "10.1007/978-3-030-72736-9_5",

language = "English",

series = "RILEM State-of-the-Art Reports",

publisher = "Springer Science and Business Media B.V.",

pages = "47--117",

booktitle = "RILEM State-of-the-Art Reports",

}

TY - CHAP

T1 - Equipment and Procedure Description

AU - Llano-Torre, Aitor

AU - Cavalaro, Sergio H.P.

AU - Kusterle, Wolfgang

AU - Moro, Sandro

AU - Zerbino, Raúl L.

AU - Gettu, Ravindra

AU - Pauwels, Hans

AU - Nishiwaki, Tomoya

AU - Parmentier, Benoît

AU - Buratti, Nicola

AU - Toledo Filho, Romildo D.

AU - Charron, Jean Philippe

AU - Larive, Catherine

AU - Boshoff, William P.

AU - Bernard, E. Stefan

AU - Kompatscher, Michael

PY - 2021

Y1 - 2021

N2 - This chapter collects the description of the main creep testing procedures in fibre-reinforced concrete (FRC) as well as the equipment used by each participant laboratory in the round-robin test (RRT). The description of each procedure was directly provided by the participants and follows the same structure for each participant where institution identification and contact information was included. Each participant summarised the most significant data such as specimen’s size, load configuration, parameters or environmental conditions in a quite useful table. Moreover, the participants included description and close-up pictures of the creep frames construction, the support boundary conditions, and the measurement devices used. Finally, the participants provided a complete description of the specific complete creep test procedure followed.

AB - This chapter collects the description of the main creep testing procedures in fibre-reinforced concrete (FRC) as well as the equipment used by each participant laboratory in the round-robin test (RRT). The description of each procedure was directly provided by the participants and follows the same structure for each participant where institution identification and contact information was included. Each participant summarised the most significant data such as specimen’s size, load configuration, parameters or environmental conditions in a quite useful table. Moreover, the participants included description and close-up pictures of the creep frames construction, the support boundary conditions, and the measurement devices used. Finally, the participants provided a complete description of the specific complete creep test procedure followed.

UR - http://www.scopus.com/inward/record.url?scp=85108720333&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85108720333&partnerID=8YFLogxK

U2 - 10.1007/978-3-030-72736-9_5

DO - 10.1007/978-3-030-72736-9_5

M3 - Chapter

AN - SCOPUS:85108720333

T3 - RILEM State-of-the-Art Reports

SP - 47

EP - 117

BT - RILEM State-of-the-Art Reports

PB - Springer Science and Business Media B.V.

ER -

Equipment and Procedure Description

Abstract

Publication series

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this