Enhancement in bath mixing and plume area in a new degassing process - A computational fluid dynamic study

M. K. Mondal, N. Maruoka, S. Kitamura, G. S. Gupta

Research output: Contribution to journalArticlepeer-review

3 Citations (Scopus)

Abstract

Reaction between the various species in slag and metal phase is usually mass transfer controlled. There have been continuous efforts to increase the reaction efficiency in slag-metal system, especially during decarburization of steel to produce the ultra low carbon steel (ULCS) in secondary steelmaking. It has been found that the surface reaction is a dominant factor in the final stage of decarburization. In the initial stage, the inner site reaction is major factor in the refining process. The mixing of bath affects the later reaction. However, the former reaction (surface reaction) is affected by the plume size area at the top of the metal surface. Therefore, a computational study has been made to understand the fluid dynamics of a new secondary steelmaking process called Revolutionary Degasser Activator (REDA) to study the bath mixing and plume area. REDA process has been considered as it is claimed that this process can reduce the carbon content in steel below 10ppm in a less time than the other existing processes such as RH and Tank degasser. This study shows that both bath mixing and plume area are increased in REDA process facilitating it to give the desired carbon content in less time. Qualitative comments are made on slag-metal reaction system based on this finding.

Original languageEnglish
Pages (from-to)1131-1135
Number of pages5
JournalArchives of Metallurgy and Materials
Volume55
Issue number4
DOIs
Publication statusPublished - 2010

Keywords

  • CFD
  • Decarburization
  • REDA
  • Ultra low carbon steel

ASJC Scopus subject areas

  • Metals and Alloys

Fingerprint Dive into the research topics of 'Enhancement in bath mixing and plume area in a new degassing process - A computational fluid dynamic study'. Together they form a unique fingerprint.

Cite this