Electrorefining behavior of copper shot-shaped anode containing high levels of platinum

Atsushi Iizuka, Akinori Sugiyama, Etsuro Shibata

Research output: Contribution to journalArticle

Abstract

Increased amounts of secondary copper resources with higher levels of impurities are being fed to copper smelters. To avoid passivation problems, low-grade copper that is derived from secondary resources is dissolved in sulfuric-acid solution, and the dissolved copper is recovered by electrowinning. Electrowinning is disadvantageous because of its higher power consumption compared with electrorefining. Based on an electroplating technique that uses basket electrolysis with a ball-shaped anode and another experimental approach of copper-scrap electrorefining in a basket, we investigated an electrorefining method that uses small low-grade copper shots (diameter of several millimeters) as an anode. It is expected that the copper-dissolution ratio will be higher, even with a small elution depth, because of the small primary-anode size and the effect of the three-dimensional shape. In addition, the current density for a shot-shaped anode can be lower than that for a plate-shaped anode at the same current and for the same occupied area, and would result in the inhibition of passivation. Rotating-disk-electrode equipment was used in the electrolysis experiments. Single-layered copper shots that contained 0.9 « 0.2 mass% Pt (18 shots) in a platinum basket were used as an anode, and a copper rotating-disk electrode (7-mm diameter) was used as a cathode. The temporal changes in anode potential were measured at a constant current to investigate the electrolytic properties of a small shot-shaped anode during the electrorefining experiments. The current efficiency and final anode-dissolution ratio exceeded 90% up to an initial anode current density of 3673 A/m2. Stable electrolysis could be carried out with a copper shot-shaped anode that contained high levels of platinum.

Original languageEnglish
Pages (from-to)963-971
Number of pages9
JournalMaterials Transactions
Volume61
Issue number5
DOIs
Publication statusPublished - 2020 Jan 1

Keywords

  • Copper
  • Electrorefining
  • Passivation
  • Platinum
  • Rotating electrode
  • Shot-shaped anode

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Electrorefining behavior of copper shot-shaped anode containing high levels of platinum'. Together they form a unique fingerprint.

  • Cite this