Electroplated FePt Films for Micromechanical Magnetic Sensors

Research output: Contribution to journalArticlepeer-review

Abstract

Herein, a ferromagnetic iron–platinum (FePt) film is deposited on a Si resonator by electroplating and patterned to form a magnetic sensor. The electroplating and annealing conditions of the FePt film are optimized to achieve micromachining with lower manufacturing costs than other deposition methods. The atomic ratio of electroplated Fe to Pt is nearly 1, which is controlled by a potential of −0.75 ± 0.02 V in a standard three-electrode electroplating system. Hydrogen annealing is performed at 750 °C, yielding an Fe-to-Pt atomic ratio of nearly 1 and achieving a coercivity of 0.3 T, which are measured using a vibrating sample magnetometer. The electroplated FePt film is patterned using the lift-off method, and the cantilever is fabricated through a standard micromachining process using a silicon-on-insulator wafer. The miniature Si resonator with the magnetized FePt film has a minimum detectable magnetic field of 20 nT. Such patterned magnets on resonators can be used for localized magnetic field detection with a magnetic moment sensitivity of ≈105μB.

Original languageEnglish
Article number2000547
JournalPhysica Status Solidi (A) Applications and Materials Science
Volume218
Issue number8
DOIs
Publication statusPublished - 2021 Apr

Keywords

  • electroplating
  • magnetic materials
  • sensors

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Electrical and Electronic Engineering
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Electroplated FePt Films for Micromechanical Magnetic Sensors'. Together they form a unique fingerprint.

Cite this