Effects of extrusion conditions on mechanical properties in Zr-Al-Ni-Cu glassy powder compacts

Yoshihito Kawamura, Hidemi Kato, Akihisa Inoue, Tsuyoshi Masumoto

Research output: Contribution to journalArticlepeer-review

22 Citations (Scopus)

Abstract

We report on extrusion conditions such as the powder handling processing and extrusion ratio and temperature in the production of glassy alloy compacts by means of the warm extrusion of powders at a supercooled liquid state. The alloy used was a Zr65Al10Ni10Cu15 (at.%) glassy alloy which has a significant supercooled liquid region of 105 K. The glassy powder compacts with almost the same tensile strength as the melt-spun glassy ribbons or the as-cast glassy bulks were produced by an extrusion in the supercooled liquid state at extrusion ratios above 4 by means of ordinary powder metallurgy processing. Closed processing, in which the powder was handled in a well-controlled atmosphere without being exposed to air, moreover, led to a higher level of strength as compared with ordinary processing, and full strength at extrusion ratios above 3, due to improvement in the powder particle bonding state. This seems to greatly affect the future development of bulk amorphous alloys that have complex shapes and novel properties.

Original languageEnglish
Pages (from-to)39-43
Number of pages5
JournalMaterials Science and Engineering A
Volume219
Issue number1-2
DOIs
Publication statusPublished - 1996 Nov 30

Keywords

  • Bulk amorphous alloy
  • Consolidation
  • Extrusion
  • Gas atomization
  • Hot-pressing
  • Mechanical property
  • Zr-Al-Ni-Cu alloy

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Effects of extrusion conditions on mechanical properties in Zr-Al-Ni-Cu glassy powder compacts'. Together they form a unique fingerprint.

Cite this