Effect of Zr-addition to Ti-14Mn alloy

Mohammed K. Gouda; Mohamed Abdel Hady Gepreel; Koichi Nakamura; Akihiko Chiba

doi:10.4028/www.scientific.net/MSF.890.352

Effect of Zr-addition to Ti-14Mn alloy

Mohammed K. Gouda, Mohamed Abdel Hady Gepreel, Koichi Nakamura, Akihiko Chiba

Materials Processing and Characterization Division

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

Abstract

The effect of Zr addition on the microstructure, cold workability and hardness of low-cost Ti-14Mn alloy was investigated. A set of alloys with1.5, 3 and6%wt. Zr were produced by arc melting. The alloys were subjected to solution heat treatment at 900 ˚C.Zr seems working as weak β-stabilizer in this Ti-14Mn-xZr alloy system. The effect of Zr-content on the cold workability was assessed.The cold workability of the Ti-14Mn-xZr alloys (withZr up to 6%) is higher than 90% reduction ration. The hardness slightly increased with the increase ofZr-content in Ti-14Mn-xZr alloys in both solution treated and cold rolled conditions.

Original language	English
Title of host publication	Material Science and Engineering Technology V
Editors	Yunqiu He, Ramesh K. Agarwal, Jean-Jacques Delaunay
Publisher	Trans Tech Publications Ltd
Pages	352-355
Number of pages	4
ISBN (Print)	9783035710281
DOIs	https://doi.org/10.4028/www.scientific.net/MSF.890.352
Publication status	Published - 2017
Event	5th International Conference on Material Science and Engineering Technology, ICMSET 2016 - Tokyo, Japan Duration: 2016 Oct 29 → 2016 Oct 31

Publication series

Name	Materials Science Forum
Volume	890 MSF
ISSN (Print)	0255-5476
ISSN (Electronic)	1662-9752

Other

Other	5th International Conference on Material Science and Engineering Technology, ICMSET 2016
Country/Territory	Japan
City	Tokyo
Period	16/10/29 → 16/10/31

Keywords

Low-cost alloys
Zirconium-addition
β-Titanium alloys

ASJC Scopus subject areas

Materials Science(all)
Condensed Matter Physics
Mechanics of Materials
Mechanical Engineering

Access to Document

10.4028/www.scientific.net/MSF.890.352

Cite this

Effect of Zr-addition to Ti-14Mn alloy. / Gouda, Mohammed K.; Gepreel, Mohamed Abdel Hady; Nakamura, Koichi; Chiba, Akihiko.

Material Science and Engineering Technology V. ed. / Yunqiu He; Ramesh K. Agarwal; Jean-Jacques Delaunay. Trans Tech Publications Ltd, 2017. p. 352-355 (Materials Science Forum; Vol. 890 MSF).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Gouda, MK, Gepreel, MAH, Nakamura, K & Chiba, A 2017, Effect of Zr-addition to Ti-14Mn alloy. in Y He, RK Agarwal & J-J Delaunay (eds), Material Science and Engineering Technology V. Materials Science Forum, vol. 890 MSF, Trans Tech Publications Ltd, pp. 352-355, 5th International Conference on Material Science and Engineering Technology, ICMSET 2016, Tokyo, Japan, 16/10/29. https://doi.org/10.4028/www.scientific.net/MSF.890.352

@inproceedings{8987da2d6c1041f79facc2f74774b599,

title = "Effect of Zr-addition to Ti-14Mn alloy",

abstract = "The effect of Zr addition on the microstructure, cold workability and hardness of low-cost Ti-14Mn alloy was investigated. A set of alloys with1.5, 3 and6%wt. Zr were produced by arc melting. The alloys were subjected to solution heat treatment at 900 ˚C.Zr seems working as weak β-stabilizer in this Ti-14Mn-xZr alloy system. The effect of Zr-content on the cold workability was assessed.The cold workability of the Ti-14Mn-xZr alloys (withZr up to 6%) is higher than 90% reduction ration. The hardness slightly increased with the increase ofZr-content in Ti-14Mn-xZr alloys in both solution treated and cold rolled conditions.",

keywords = "Low-cost alloys, Zirconium-addition, β-Titanium alloys",

author = "Gouda, {Mohammed K.} and Gepreel, {Mohamed Abdel Hady} and Koichi Nakamura and Akihiko Chiba",

note = "Publisher Copyright: {\textcopyright} 2017 Trans Tech Publications, Switzerland. Copyright: Copyright 2020 Elsevier B.V., All rights reserved.; 5th International Conference on Material Science and Engineering Technology, ICMSET 2016 ; Conference date: 29-10-2016 Through 31-10-2016",

year = "2017",

doi = "10.4028/www.scientific.net/MSF.890.352",

language = "English",

isbn = "9783035710281",

series = "Materials Science Forum",

publisher = "Trans Tech Publications Ltd",

pages = "352--355",

editor = "Yunqiu He and Agarwal, {Ramesh K.} and Jean-Jacques Delaunay",

booktitle = "Material Science and Engineering Technology V",

}

TY - GEN

T1 - Effect of Zr-addition to Ti-14Mn alloy

AU - Gouda, Mohammed K.

AU - Gepreel, Mohamed Abdel Hady

AU - Nakamura, Koichi

AU - Chiba, Akihiko

PY - 2017

Y1 - 2017

N2 - The effect of Zr addition on the microstructure, cold workability and hardness of low-cost Ti-14Mn alloy was investigated. A set of alloys with1.5, 3 and6%wt. Zr were produced by arc melting. The alloys were subjected to solution heat treatment at 900 ˚C.Zr seems working as weak β-stabilizer in this Ti-14Mn-xZr alloy system. The effect of Zr-content on the cold workability was assessed.The cold workability of the Ti-14Mn-xZr alloys (withZr up to 6%) is higher than 90% reduction ration. The hardness slightly increased with the increase ofZr-content in Ti-14Mn-xZr alloys in both solution treated and cold rolled conditions.

AB - The effect of Zr addition on the microstructure, cold workability and hardness of low-cost Ti-14Mn alloy was investigated. A set of alloys with1.5, 3 and6%wt. Zr were produced by arc melting. The alloys were subjected to solution heat treatment at 900 ˚C.Zr seems working as weak β-stabilizer in this Ti-14Mn-xZr alloy system. The effect of Zr-content on the cold workability was assessed.The cold workability of the Ti-14Mn-xZr alloys (withZr up to 6%) is higher than 90% reduction ration. The hardness slightly increased with the increase ofZr-content in Ti-14Mn-xZr alloys in both solution treated and cold rolled conditions.

KW - Low-cost alloys

KW - Zirconium-addition

KW - β-Titanium alloys

UR - http://www.scopus.com/inward/record.url?scp=85016429087&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85016429087&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/MSF.890.352

DO - 10.4028/www.scientific.net/MSF.890.352

M3 - Conference contribution

AN - SCOPUS:85016429087

SN - 9783035710281

T3 - Materials Science Forum

SP - 352

EP - 355

BT - Material Science and Engineering Technology V

A2 - He, Yunqiu

A2 - Agarwal, Ramesh K.

A2 - Delaunay, Jean-Jacques

PB - Trans Tech Publications Ltd

T2 - 5th International Conference on Material Science and Engineering Technology, ICMSET 2016

Y2 - 29 October 2016 through 31 October 2016

ER -

Effect of Zr-addition to Ti-14Mn alloy

Abstract

Publication series

Other

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this