Effect of the cooling rate on the mechanical properties of Ti-Ni-Cu-Zr-based crystal/glassy alloys

Research output: Contribution to journalArticlepeer-review

5 Citations (Scopus)

Abstract

Ti-Ni-Cu-Zr-based crystal/glassy dual-phase alloy samples with different sizes and good mechanical properties were manufactured. The structure of these samples was examined via X-ray Diffraction, Scanning Electron Microscopy, and Transmission Electron Microscopy. The developed dual-phase structure alloys combine the high strength of glassy alloys and plasticity of crystalline alloys. Plastic deformation was enhanced by this dual-phase structure. Mechanical characterization of the alloys revealed three deformation stages, namely a martensitic transformation, dislocation slip in a crystalline phase, and shear deformation of the glassy matrix. Two types of effects involving the martensitic transformation were observed: superelastic behavior and the transformation induced plasticity (TRIP) effect, which provide an additional deformation mechanism and lead to a significant increase in the plasticity of these dual-phase samples. The results indicate that the fraction of glassy phase occurring in large rods formed at lower cooling rates is lower than that occurring in smaller rods; therefore, the deformation-induced martensitic transformation of the crystalline cP2 phase in the large samples occurs at lower stresses.

Original languageEnglish
Pages (from-to)147-153
Number of pages7
JournalMaterials Science and Engineering A
Volume704
DOIs
Publication statusPublished - 2017 Sep 17

Keywords

  • Cooling rate
  • Crystal/glassy alloys
  • Mechanical properties

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Effect of the cooling rate on the mechanical properties of Ti-Ni-Cu-Zr-based crystal/glassy alloys'. Together they form a unique fingerprint.

Cite this