Effect of temperature on deposition of LaPO4 coatings produced by ultrasonic-based coating process on steel substrates

S. Romankov, S. V. Komarov, N. Hayashi, S. Ueno, S. Kaloshkin, E. Kasai

Research output: Contribution to journalArticlepeer-review

20 Citations (Scopus)

Abstract

High-adhesion LaPO4 coatings were fabricated on steel substrates at temperatures of 150-400 °C after a 10 min treatment using an ultrasonic-based coating process. The principle underlying this process is the collision of ultrasonically accelerated hard balls with the substrate surface that is covered by loosely adhered LaPO4 particles. The repeated substrate-to-ball collisions flatten the precoated LaPO4 particles, bond them together and cold weld them to the substrate. The coating thickness, roughness and structure were found to depend on the substrate temperature. The LaPO4 coatings produced at temperatures ranging from 150 to 250 °C exhibited a granular and porous structure. The treatment at temperatures higher than 300 °C enabled the production of rather dense coatings.

Original languageEnglish
Pages (from-to)4285-4290
Number of pages6
JournalSurface and Coatings Technology
Volume202
Issue number17
DOIs
Publication statusPublished - 2008 May 25

Keywords

  • Coating
  • LaPO
  • Mechanical alloying
  • Microstructure
  • Surface structure

ASJC Scopus subject areas

  • Chemistry(all)
  • Condensed Matter Physics
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Effect of temperature on deposition of LaPO<sub>4</sub> coatings produced by ultrasonic-based coating process on steel substrates'. Together they form a unique fingerprint.

Cite this