Effect of Ta-substitution on the deposition of (K,Na)(Nb,Ta)O3 films by hydrothermal method

Yuta Muto, Takahisa Shiraishi, Yoshiharu Ito, Akinori Tateyama, Hiroshi Uchida, Takanori Kiguchi, Hiroshi Funakubo, Toyohiko J. Konno

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

Ta substituted (K,Na)NbO3 films have been deposited at 200 °C on (001)La:SrTiO3 substrates by hydrothermal method. Film composition continuously changed with increasing the concentration of Ta2O5 in the raw material powder, and X-ray diffraction measurement showed that {001}c-oriented epitaxial (KxNa1-x)(Nb1-yTay)O3 films were obtained for all compositions. Microstructural analysis using scanning electron microscopy and transmission electron microscopy revealed that Ta-substitution made {001}c planes dominate on the surface of the film, leading to an improvement in average surface roughness. Film thickness increased with deposition time and eventually saturated. However, the saturated film thickness decreased with increasing Ta/(Nb + Ta) ratio. By evaluating the residual powders synthesized simultaneously with the films, it was found that the formation of the perovskite phase had already started in the very early stage of the deposition process, provided that Ta2O5 powder was present in the source solution.

Original languageEnglish
Article numberSLLB12
JournalJapanese journal of applied physics
Volume58
Issue numberSL
DOIs
Publication statusPublished - 2019 Jan 1

ASJC Scopus subject areas

  • Engineering(all)
  • Physics and Astronomy(all)

Fingerprint Dive into the research topics of 'Effect of Ta-substitution on the deposition of (K,Na)(Nb,Ta)O<sub>3</sub> films by hydrothermal method'. Together they form a unique fingerprint.

  • Cite this