Effect of microstructural continuity on room-temperature fracture toughness of ZrC-added MoSiB alloys

Shunichi Nakayama, Nobuaki Sekido, Sojiro Uemura, Sadahiro Tsurekawa, Kyosuke Yoshimi

Research output: Contribution to journalArticlepeer-review

5 Citations (Scopus)

Abstract

The room-temperature fracture toughness of ZrC-added MoSiB alloys prepared using an arc-melting technique was investigated. The constituent phases of the heat-treated alloys were mainly molybdenum solid solution (Moss), Mo5SiB2 (T2), and ZrC, with a small amount of Mo2B in a few alloys. Four-point bending tests with a Chevron-notch were performed, and the average fracture-toughness values ranged from 12.4 to 20.3 MPa(m)1/2 depending on alloy composition. Here, the effects of the volume fractions of the constituent phases and the continuity of Moss on the fracture toughness are discussed. The fracture toughness improved with an increase in the volume fractions of the Moss and ZrC phases. Alloys with a higher Moss continuity exhibited higher fracture toughness, for example, the fracture toughness of 64.5Mo3.2Si6.5B12.9Zr12.9C (mol.%) was 19 MPa(m)1/2; the alloy contained a >95%-continuous Moss phase, even though it also contained 16 vol.% T2 and 23 vol.% ZrC.

Original languageEnglish
Pages (from-to)518-527
Number of pages10
JournalMaterials Transactions
Volume59
Issue number4
DOIs
Publication statusPublished - 2018

Keywords

  • Continuity
  • Fracture toughness
  • Microstructure
  • Molybdenumsiliconboron alloys
  • Zirconium carbide

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Effect of microstructural continuity on room-temperature fracture toughness of ZrC-added MoSiB alloys'. Together they form a unique fingerprint.

Cite this