Effect of initial microstructure on stress-strain behavior in Mg-Sc-Zn based alloy with high Sc content

Yuta Takeuchi, Yukiko Ogawa, Daisuke Ando, Yuji Sutou, Junichi Koike

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

Mg-Sc-Zn based alloy was investigated to understand the effects of introducing bcc structure on mechanical properties. The alloy ingot was prepared by induction melting of ZK60 and pure Sc in Ar atmosphere, and then hot rolled at 550°C into a sheet. The rolled sheets were finally annealed at 500 (designated as a-type) and 680°C (designated as α + β-type) for 30 minutes. From XRD patterns and SEM observation, the existence of ScZn compound was confirmed in both samples. The volume fraction ratio of bcc/(hcp + bcc) were 0 and 73% on samples annealed at 500 and 680°C, respectively. The ultimate tensile strength (UTS) and elongation of the α(hcp)-type sample were 280 MPa and 20.5%, respectively, while those of α(hcp) + β(bcc)-type sample were 373 MPa and 5.9%, respectively. It was found that c/a ratio of α-type sample was small indicating that non-basal slip systems were activated during tensile test. On the other hand, it was suggested that, in β phase, the stress induced phase transformation from bcc to hcp occurred during tensile test which causes higher strength and lower elongation.

Original languageEnglish
Pages (from-to)276-281
Number of pages6
JournalNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
Volume81
Issue number5
DOIs
Publication statusPublished - 2017

Keywords

  • Hcp+bcc dual phase
  • Magnesium alloy
  • Mechanical property
  • Stress induced transformation

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Effect of initial microstructure on stress-strain behavior in Mg-Sc-Zn based alloy with high Sc content'. Together they form a unique fingerprint.

Cite this