Effect of high strain-rate deformation on surface mechanical properties of stainless steel after peening

Shinya Kanou, Masaaki Nishikawa, Hitoshi Soyama

Research output: Contribution to journalArticle

Abstract

This paper investigated the effect of high-rate deformation on the change of mechanical properties on the surface of metallic materials during a peening as a surface modification of metallic materials. Especially, we focused on the introduced compressive residual stress and the yield stress increase on the surface, which brings about the improvement of fatigue strength of the materials after peening. For this purpose, we compared the results using two different peening. One is a static indentation with a steel ball, and the other is a dynamic peening with high velocity. The residual stresses were obtained through the comparison with experimental depths using an elastic-viscoplastic finite element model for the peening, and the variation in yield stress was also obtained using indentation tests and numerical analysis of indentation tests. As a result, we clarified the effect of strain-rate on the variation in yield stress and induced residual stress. Especially, the compressive residual stress and the increments of yield stress of the surface layer within 600 μm depth after dynamic peening was larger than that after static peening.

Original languageEnglish
Pages (from-to)1775-1780
Number of pages6
JournalNihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A
Volume76
Issue number772
DOIs
Publication statusPublished - 2010 Dec
Externally publishedYes

Keywords

  • Peening
  • Residual stress
  • Strain rate
  • Surface improvement
  • Yield stress

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Effect of high strain-rate deformation on surface mechanical properties of stainless steel after peening'. Together they form a unique fingerprint.

Cite this