Effect of cooling rate on superelasticity and microstructure evolution in Ti-10V-2Fe-3Al and Ti-10V-2Fe-3Al-0.2N alloys

Yusaku Tomio, Tadashi Furuhara, Tadashi Maki

Research output: Contribution to journalArticlepeer-review

15 Citations (Scopus)

Abstract

A Ti-10V-2Fe-3Al alloy with a small amount of nitrogen shows superelasticity. Controlling of the cooling rate from β solution treatment temperature improves superelasticity in both Ti-10V-2Fe-3Al and Ti-10V-2Fe3-Al-0.2N alloys. In this study, a wider range of the cooling rate was examined and microstructure change during slow cooling was investigated through examining quenched and aged specimens by means of hardness and resistivity measurement and transmission electron microscopy. Although superelasticity is improved with a decrease in the cooling rate up to 22 K/s for the N-free alloy and up to 50 K/s for the 0.2N alloy, there is no obvious change in microstructure. It is clarified from the observation of specimens quenched and aged at the temperature range where superelasticity is improved that the β phase decomposition occurs through isothermal ω phase precipitation. Therefore, microstructure evolution during slow cooling is considered to be precipitation of isothermal ω phase or its precursor phenomena.

Original languageEnglish
Pages (from-to)2731-2736
Number of pages6
JournalMaterials Transactions
Volume50
Issue number12
DOIs
Publication statusPublished - 2009 Dec

Keywords

  • Cooling rate
  • Nitrogen
  • Phase decomposition
  • Superelasticity
  • Titanium alloy

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Effect of cooling rate on superelasticity and microstructure evolution in Ti-10V-2Fe-3Al and Ti-10V-2Fe-3Al-0.2N alloys'. Together they form a unique fingerprint.

Cite this