Effect of APB type on tensile properties of Cr added Fe3Al with D03 structure

K. Yoshimi, H. Terashima, S. Hanada

Research output: Contribution to journalArticle

37 Citations (Scopus)

Abstract

Fe25 mol.%Al2mol.%Cr, Fe28mol.%Al and Fe28mol.%Al2mol.%Cr alloys were prepared in order to investigate the effect of Cr addition on antiphase boundary (APB) types and tensile properties of D03 single-phase Fe3Al polycrystals. The highest elongation and the lowest work-hardening rate are obtained for Fe28Al2Cr. Fe25Al2Cr has the lowest elongation and the highest work-hardening rate. In addition to thermal APBs, many uncoupled superpartial dislocations dragging extended APBs can be seen in deformation microstructures for all the alloys. In Fe25Al2Cr B-type APBs are frequently observed with a small amount of D03-type APBs, whereas in Fe28Al and Fe28Al2Cr all of thermal or deformation-induced APBs are of D03-type. Uncoupled superpartial dislocations in deformed Fe25Al2Cr are blocked at thermal or deformation-induced APBs. By considering coordination configurations of neighbouring atoms at an APB, the blocking force against dislocation motions is shown to be higher for the B2-type APB than for the D03-type APB. This is related to the highest work-hardening rate of Fe25Al2Cr. In contrast, cross-slipping of uncoupled superpartials is more frequently observed in Fe28Al2Cr than in Fe28Al. The work-hardening rate of Fe28Al2Cr would be reduced by the occurrence of cross-slipping. Ductility improvement by the Cr addition is discussed in terms of an intrinsic change in the work-hardening rate of D03 Fe3Al alloys.

Original languageEnglish
Pages (from-to)53-61
Number of pages9
JournalMaterials Science and Engineering A
Volume194
Issue number1
DOIs
Publication statusPublished - 1995 Apr

Keywords

  • Aluminium
  • Antiphase boundaries
  • Chromium
  • Iron

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Effect of APB type on tensile properties of Cr added Fe<sub>3</sub>Al with D0<sub>3</sub> structure'. Together they form a unique fingerprint.

Cite this