Dissimilar friction welding of tubular Zr-based bulk metallic glasses

Hyung Seop Shin, Jung Soo Park, Yoshihiko Yokoyama

Research output: Contribution to journalArticlepeer-review

19 Citations (Scopus)

Abstract

In this study, the similar and dissimilar friction welding of tubular Zr-based BMGs to BMGs and crystalline metals have been tried and compared with the cases of BMG rods. In order to characterize the friction weld interface, the morphology of protrusion formed and the temperature distribution at weld interface during friction welding were measured, and micrographic observation and X-ray diffraction analysis on the weld cross-section were carried out. In the case of friction welding of tubular BMGs, it was possible to suppress the development of protrusion formed at the interior of tube by introducing an insert into the joining part of tube specimen. A successful joining of the bulk metallic glass (BMG) to crystalline metals could be obtained for certain pairs of the material combination through the precise control of friction conditions. The residual strength after friction welding was evaluated by the 4-point bending test and compared with the cases of BMG rods.

Original languageEnglish
Pages (from-to)S275-S278
JournalJournal of Alloys and Compounds
Volume504
Issue numberSUPPL. 1
DOIs
Publication statusPublished - 2010 Aug 1

Keywords

  • Bulk metallic glass
  • Dissimilar friction welding
  • Residual strength
  • Tubular shape

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Dissimilar friction welding of tubular Zr-based bulk metallic glasses'. Together they form a unique fingerprint.

Cite this