Discoloration of coating resins exposed to staining solutions in vitro

Atsufumi Manabe; Yukiyo Kato; Werner J. Finger; Masafumi Kanehira; Masashi Komatsu

doi:10.4012/dmj.28.338

Discoloration of coating resins exposed to staining solutions in vitro

Atsufumi Manabe, Yukiyo Kato, Werner J. Finger, Masafumi Kanehira, Masashi Komatsu

DEN - Dental Sciences

Research output: Contribution to journal › Article › peer-review

11 Citations (Scopus)

Abstract

The purpose of this in vitro investigation was to study the effects of coffee and tea immersion on surface discoloration of one commercial temporary resin coating material, White Coat (WHC; Kuraray Medical Inc., Tokyo, Japan), and an experimental one, SI-R20209 (SIR; Shofu Inc., Kyoto, Japan). Disk-shaped specimens were prepared, their colors were determined at baseline, and after immersion in water (control), tea and coffee solutions for 24, 48, and 72 hours. Very little discoloration was found with the water-stored specimens. Staining response was most pronounced after coffee immersion for White Coat and after tea immersion for the experimental material, exceeding the clinically acceptable discoloration threshold value of δE=3.3. However, most of the resin shades tested are likely to be sufficiently safe against heavy discoloration when used for short-term restoration only.

Original language	English
Pages (from-to)	338-343
Number of pages	6
Journal	Dental materials journal
Volume	28
Issue number	3
DOIs	https://doi.org/10.4012/dmj.28.338
Publication status	Published - 2009 May

Keywords

Coating resin
In vitro color stability
Staining resistance

ASJC Scopus subject areas

Ceramics and Composites
Dentistry(all)

Access to Document

10.4012/dmj.28.338

Cite this

@article{620607794dc140c5b8b057302d0e3ee7,

title = "Discoloration of coating resins exposed to staining solutions in vitro",

abstract = "The purpose of this in vitro investigation was to study the effects of coffee and tea immersion on surface discoloration of one commercial temporary resin coating material, White Coat (WHC; Kuraray Medical Inc., Tokyo, Japan), and an experimental one, SI-R20209 (SIR; Shofu Inc., Kyoto, Japan). Disk-shaped specimens were prepared, their colors were determined at baseline, and after immersion in water (control), tea and coffee solutions for 24, 48, and 72 hours. Very little discoloration was found with the water-stored specimens. Staining response was most pronounced after coffee immersion for White Coat and after tea immersion for the experimental material, exceeding the clinically acceptable discoloration threshold value of δE=3.3. However, most of the resin shades tested are likely to be sufficiently safe against heavy discoloration when used for short-term restoration only.",

keywords = "Coating resin, In vitro color stability, Staining resistance",

author = "Atsufumi Manabe and Yukiyo Kato and Finger, {Werner J.} and Masafumi Kanehira and Masashi Komatsu",

year = "2009",

month = may,

doi = "10.4012/dmj.28.338",

language = "English",

volume = "28",

pages = "338--343",

journal = "Dental Materials Journal",

issn = "0287-4547",

publisher = "Japanese Society for Dental Materials and Devices",

number = "3",

}

TY - JOUR

T1 - Discoloration of coating resins exposed to staining solutions in vitro

AU - Manabe, Atsufumi

AU - Kato, Yukiyo

AU - Finger, Werner J.

AU - Kanehira, Masafumi

AU - Komatsu, Masashi

PY - 2009/5

Y1 - 2009/5

N2 - The purpose of this in vitro investigation was to study the effects of coffee and tea immersion on surface discoloration of one commercial temporary resin coating material, White Coat (WHC; Kuraray Medical Inc., Tokyo, Japan), and an experimental one, SI-R20209 (SIR; Shofu Inc., Kyoto, Japan). Disk-shaped specimens were prepared, their colors were determined at baseline, and after immersion in water (control), tea and coffee solutions for 24, 48, and 72 hours. Very little discoloration was found with the water-stored specimens. Staining response was most pronounced after coffee immersion for White Coat and after tea immersion for the experimental material, exceeding the clinically acceptable discoloration threshold value of δE=3.3. However, most of the resin shades tested are likely to be sufficiently safe against heavy discoloration when used for short-term restoration only.

AB - The purpose of this in vitro investigation was to study the effects of coffee and tea immersion on surface discoloration of one commercial temporary resin coating material, White Coat (WHC; Kuraray Medical Inc., Tokyo, Japan), and an experimental one, SI-R20209 (SIR; Shofu Inc., Kyoto, Japan). Disk-shaped specimens were prepared, their colors were determined at baseline, and after immersion in water (control), tea and coffee solutions for 24, 48, and 72 hours. Very little discoloration was found with the water-stored specimens. Staining response was most pronounced after coffee immersion for White Coat and after tea immersion for the experimental material, exceeding the clinically acceptable discoloration threshold value of δE=3.3. However, most of the resin shades tested are likely to be sufficiently safe against heavy discoloration when used for short-term restoration only.

KW - Coating resin

KW - In vitro color stability

KW - Staining resistance

UR - http://www.scopus.com/inward/record.url?scp=67649531369&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=67649531369&partnerID=8YFLogxK

U2 - 10.4012/dmj.28.338

DO - 10.4012/dmj.28.338

M3 - Article

C2 - 19662733

AN - SCOPUS:67649531369

VL - 28

SP - 338

EP - 343

JO - Dental Materials Journal

JF - Dental Materials Journal

SN - 0287-4547

IS - 3

ER -

Discoloration of coating resins exposed to staining solutions in vitro

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this