Diffraction simulation of SAW filters using SAW source distribution

O. Hikino, M. Koshiba, K. Hasegawa, T. Shiba, A. Yuhara, D. C. Malocha

Research output: Contribution to journalConference article

1 Citation (Scopus)

Abstract

A new approach for the simulation of the diffraction effect in Surface Acoustic Wave (SAW) filters based on the two dimensional Angular Spectrum of Wave method is proposed. In this simulation, the line source is considered as the particle displacement distribution inbetween the electrode finger's overlap region on the surface of the material which was conventionally treated as the uniform intensity line wave source. In this paper, we describe the derivation of the SAW source distribution from the particle displacement which is derived from the three dimensional Finite Element Method (FEM) applied to an IDT finger overlap in the grating structure. Then we apply the above SAW source distribution to the simulation of the frequency response of the SAW filter including the diffraction effect. The frequency dependency of the SAW source distribution will be also discussed. The diffraction simulation including the newly presented method along with the conventional method are compared with the experimental results.

Original languageEnglish
Pages (from-to)159-163
Number of pages5
JournalProceedings of the IEEE Ultrasonics Symposium
Volume1
Publication statusPublished - 1996 Dec 1
Externally publishedYes
EventProceedings of the 1996 IEEE Ultrasonics Symposium. Part 2 (of 2) - San Antonio, TX, USA
Duration: 1996 Nov 31996 Nov 6

ASJC Scopus subject areas

  • Acoustics and Ultrasonics

Fingerprint Dive into the research topics of 'Diffraction simulation of SAW filters using SAW source distribution'. Together they form a unique fingerprint.

  • Cite this

    Hikino, O., Koshiba, M., Hasegawa, K., Shiba, T., Yuhara, A., & Malocha, D. C. (1996). Diffraction simulation of SAW filters using SAW source distribution. Proceedings of the IEEE Ultrasonics Symposium, 1, 159-163.