TY - JOUR
T1 - Development of striated roughness on surface machined by abrasive water jet
AU - Niu, Mingsheng
AU - Fukunishi, Yu
AU - Kobayashi, Ryoji
AU - Uchida, Kota
N1 - Copyright:
Copyright 2017 Elsevier B.V., All rights reserved.
PY - 1997
Y1 - 1997
N2 - Experimental and numerical investigations are carried out to study the striation and roughness formation mechanism on the cutting surface in the machining process using an abrasive water jet. The results of two-dimensional numerical simulations which are based on a simple model are compared with experimental results. The agreement between the two is satisfactory. It is also shown that although the surface roughness increases with the distance from the nozzle, the mechanism by which the material is cut and the striations formed is fundamentally the same throughout the kerf.
AB - Experimental and numerical investigations are carried out to study the striation and roughness formation mechanism on the cutting surface in the machining process using an abrasive water jet. The results of two-dimensional numerical simulations which are based on a simple model are compared with experimental results. The agreement between the two is satisfactory. It is also shown that although the surface roughness increases with the distance from the nozzle, the mechanism by which the material is cut and the striations formed is fundamentally the same throughout the kerf.
UR - http://www.scopus.com/inward/record.url?scp=0031121741&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=0031121741&partnerID=8YFLogxK
U2 - 10.1299/kikaib.63.1237
DO - 10.1299/kikaib.63.1237
M3 - Article
AN - SCOPUS:0031121741
VL - 63
SP - 1237
EP - 1242
JO - Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B
JF - Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B
SN - 0387-5016
IS - 608
ER -