Development of low-Young’s modulus Ti–Nb-based alloys with Cr addition

Qiang Li, Guanghao Ma, Junjie Li, Mitsuo Niinomi, Masaaki Nakai, Yuichro Koizumi, Dai Xiu Wei, Tomoyuki Kakeshita, Takayoshi Nakano, Akihiko Chiba, Xuyan Liu, Kai Zhou, Deng Pan

Research output: Contribution to journalArticlepeer-review

10 Citations (Scopus)

Abstract

Different amounts of Cr were added to a metastable β-type Ti–22Nb (at.%) alloy to obtain desirable mechanical properties, including a low Young’s modulus, high strength, and good plasticity. The mechanical properties and microstructural changes were investigated. Cr has a high ability to stabilize the β phase, as well as suppress both α″ martensite and ω phase transformations during quenching and the stress-induced α″ martensite transformation during tension. Solid solution strengthening is scarcely achieved by Cr addition. The changes in mechanical properties can be attributed to the different β stabilities. The Ti–22Nb–(0,1)Cr alloys have metastable β phases and exhibit double yielding phenomena, indicating a stress-induced α″ martensite transformation. The Ti–22Nb–(2,3)Cr alloys with stable β phases exhibit distinct work hardening caused by a {332}β<113>β twinning, which also occurs in the Ti–22Nb–(0,1)Cr alloys, but not in the Ti–22Nb–4Cr alloy. Low Young’s moduli of approximately 60 GPa are obtained for the Ti–22Nb–(1,2)Cr alloys. The Ti–22Nb–2Cr alloy exhibits desirable properties for biomedical applications, including an ultimate tensile strength of approximately 600 MPa and elongation of approximately 20%.

Original languageEnglish
Pages (from-to)8675-8683
Number of pages9
JournalJournal of Materials Science
Volume54
Issue number11
DOIs
Publication statusPublished - 2019 Jun 15
Externally publishedYes

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Development of low-Young’s modulus Ti–Nb-based alloys with Cr addition'. Together they form a unique fingerprint.

Cite this