Development of eddy current testing system for complicated-shaped components

Akira Nishimizu, Tetsuya Matsui, Masahiro Koike, Yoshio Nonaka, Toshio Kojima, Futoshi Kobayashi, Toshiyuki Takagi, Tetsuya Uchimoto, Hisashi Endo, Mitsuo Hashimoto, Katsuhiro Fukuoka

Research output: Contribution to journalArticlepeer-review

6 Citations (Scopus)

Abstract

The objectives of this study are to develop a new inspection probe for complex structures using eddy current testing method (ECT), to establish the recognition technique of real flaw shape such as stress corrosion cracking (SCC), and to develop a rapid nondestructive inspection system. An ECT system consists of measurement and computational modules that are connected via a network circuit. The measurement module includes a flexible ECT sensor, which could fit on the curvature surface of radius larger than 25 mm with a mechanical manipulator. The computational module is used for SCC sizing. It includes a database of ECT signals that are used to execute numerical calculations. SCC sizing can be evaluated by comparing the measured ECT signals with the calculated ECT signals within the database. We have demonstrated that the system could be used to estimate the SCC length and depth sizing in 140 s. The accuracy of length sizing showed an RMS error of 3.7 mm and the depth sizing was 0.63 mm in this work.

Original languageEnglish
Pages (from-to)142-151
Number of pages10
JournalTransactions of the Atomic Energy Society of Japan
Volume7
Issue number2
DOIs
Publication statusPublished - 2008 Jun

Keywords

  • Complicated shaped parts
  • Eddy current testing
  • Flexible sensor
  • Network
  • Nondestructive inspection
  • Stress corrosion cracking

ASJC Scopus subject areas

  • Nuclear Energy and Engineering
  • Safety, Risk, Reliability and Quality

Fingerprint Dive into the research topics of 'Development of eddy current testing system for complicated-shaped components'. Together they form a unique fingerprint.

Cite this