Development of aluminum (Al5083)-clad ternary Ag-In-Cd alloy for JSNS decoupled moderator

M. Teshigawara, M. Harada, S. Saito, K. Oikawa, F. Maekawa, M. Futakawa, K. Kikuchi, T. Kato, Y. Ikeda, T. Naoe, T. Koyama, T. Ooi, S. Zherebtsov, M. Kawai, H. Kurishita, K. Konashi

Research output: Contribution to journalArticlepeer-review

9 Citations (Scopus)

Abstract

To develop Ag (silver)-In (indium)-Cd (cadmium) alloy decoupler, a method is needed to bond the decoupler between Al alloy (Al5083) and the ternary Ag-In-Cd alloy. We found that a better HIP condition was temperature, pressure and holding time at 803 K, 100 MPa and 10 min. for small test pieces (φ{symbol}22 mm in dia. × 6 mm in height). Hardened layer due to the formation of AlAg2 was found in the bonding layer, however, the rupture strength of the bonding layer is more than 30 MPa, the calculated design stress. Bonding tests of a large size piece (200 × 200 × 30 mm3), which simulated the real scale, were also performed according to the results of small size tests. The result also gave good bonding and enough required-mechanical-strength.

Original languageEnglish
Pages (from-to)300-307
Number of pages8
JournalJournal of Nuclear Materials
Volume356
Issue number1-3
DOIs
Publication statusPublished - 2006 Sep 15

Keywords

  • A0500
  • J0100
  • M0300

ASJC Scopus subject areas

  • Nuclear and High Energy Physics
  • Materials Science(all)
  • Nuclear Energy and Engineering

Fingerprint Dive into the research topics of 'Development of aluminum (Al5083)-clad ternary Ag-In-Cd alloy for JSNS decoupled moderator'. Together they form a unique fingerprint.

Cite this