Development of a YBa2Cu3O7 filament leads unit

Kazuo Watanabe, Tomoko Goto, Shaowei Zhu, Tatsuo Inoue

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

In order to reduce thermal inputs through many measuring copper leads, we intended to fabricate a measuring leads unit using very fine YBa2Cu3O7 filaments. The long YBa2Cu3O7 filaments were prepared by a textile fiber spinning method for the oxide precursor. The 60 filaments with a size of 100 μm in diameter and 60 mm in length were attached onto three fiber-reinforced polymers, and were covered with epoxy resin. Both ends of the YBa2Cu3O7 filament were soldered with pin connectors through copper leads with 0.1 mm in diameter. The YBa2Cu3O7 measuring leads unit of 60 terminals was cooled by a pulse tube cryocooler. The newly developed YBa2Cu3O7 measuring leads unit demonstrates the extremely small heat loads of 1/10 in comparison with conventional copper measuring leads.

Original languageEnglish
Pages (from-to)399-403
Number of pages5
JournalPhysica C: Superconductivity and its applications
Volume384
Issue number3
DOIs
Publication statusPublished - 2003 Feb 1

Keywords

  • Cryocooler
  • Measuring leads
  • Superconducting filament
  • YBaCuO

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Development of a YBa<sub>2</sub>Cu<sub>3</sub>O<sub>7</sub> filament leads unit'. Together they form a unique fingerprint.

  • Cite this