Development of a solvent selection guide for CO2 spray coating

Yoshiyuki Sato, Tomoki Shimada, Kohei Abe, Hiroshi Inomata, Shin ichiro Kawasaki

Research output: Contribution to journalArticlepeer-review

3 Citations (Scopus)

Abstract

The use of CO2 for spray coating is a promising technique for volatile organic compound reduction in the paint industry. However, the polymer precipitation might be induced by the addition of CO2 into solvent, since CO2 is a poor solvent for most polymer solutions. In this work, a solvent selection guide for CO2 spray coating is proposed based on the solubility parameter from the viewpoint of avoiding the polymer precipitation. The precipitation tests were carried out for polymer (acrylic resin) + solvent (eight kinds) + CO2 systems. The solubilities of CO2 in the polymer + solvent (diethyl ketone, butanol, and methanol) varied from 7 to 33 wt.% CO2 at 40 °C for pressures from 0.9 to 6.4 MPa. It was found that the solubility parameter of the mixture at the precipitation point had similar values that are due to dissolution of the CO2 in the solution.

Original languageEnglish
Pages (from-to)172-175
Number of pages4
JournalJournal of Supercritical Fluids
Volume130
DOIs
Publication statusPublished - 2017 Dec

Keywords

  • Phase equilibria
  • Polymer solution
  • Solubility parameter

ASJC Scopus subject areas

  • Chemical Engineering(all)
  • Condensed Matter Physics
  • Physical and Theoretical Chemistry

Fingerprint Dive into the research topics of 'Development of a solvent selection guide for CO<sub>2</sub> spray coating'. Together they form a unique fingerprint.

Cite this