Development of a large-current high-precision pulse power supply

Tomohiro Takayanagi, Shoichiro Koseki, Hiroshi Kubo, Shuji Katoh, Shinichi Ogawa

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

JAEA and KEK are jointly constructing a high-intensity proton accelerator project J-PARC. Its main accelerator is a 3-GeV synchrotron. Its injection bump magnets, especially horizontal paint bump magnets, are excited by large pulse currents. Their rated currents are over 10 kA and pulse widths are about 1 ms. Tracking errors are required to be less than 1%. Multiple connected two-quadrant IGBT choppers are adopted for their power supplies. Their output currents are controlled by feedback control with minor loop voltage control (m-AVR). When output current of a chopper intermits at small current, its output voltage rises and current control becomes difficult. In this paper, response of m-AVR and output voltage characteristics at current intermittent region are studied and an improved control scheme is proposed. The performance is confirmed by a test.

Original languageEnglish
Pages (from-to)62-72
Number of pages11
JournalElectrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi)
Volume166
Issue number3
DOIs
Publication statusPublished - 2009 Feb 1
Externally publishedYes

Keywords

  • Chopper
  • Current control
  • Current intermittence
  • Excitation power supply
  • Periodic control
  • Voltage control

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Development of a large-current high-precision pulse power supply'. Together they form a unique fingerprint.

Cite this