Determination of the zero-position for an optical angle sensor

Jun Tamada, Yukitoshi Kudo, Yuan Liu Chen, Yuki Shimizu, Wei Gao

Research output: Contribution to journalArticlepeer-review

7 Citations (Scopus)

Abstract

This paper proposes a new optical angle sensor, in which a mode-locked femtosecond laser referred to as the optical frequency comb is employed as the light source for the sensor. By using the optical frequency comb, whose carrier frequency is well stabilized by using an external frequency standard with the uncertainty of 10-11, both the sensor stability and the sensor sensitivity are expected to be improved. In this paper, the angle error caused by the frequency fluctuation of the laser beam is considered in the case of both the mode-locked femtosecond laser and a laser diode, which is a conventional light source for the optical angle sensor. A prototype optical sensor head with the mode-locked femtosecond laser is then fabricated for the angle sensor. Since the light wavelength of the mode-locked femtosecond laser used in this paper is out of the visible range, an alignment method based on laser autocollimation with a retroreflector is introduced to determine the zero-position for the angle sensor. This method is also effective in suppressing the influence of the alignment error such as a cosine error. Some basic experiments are carried out to verify the feasibility of the developed angle sensor with the optical frequency comb.

Original languageEnglish
JournalJournal of Advanced Mechanical Design, Systems and Manufacturing
Volume10
Issue number5
DOIs
Publication statusPublished - 2016

Keywords

  • Angular displacement
  • Laser autocollimation
  • Optical angle sensor
  • Optical frequency comb
  • R etroreflector

ASJC Scopus subject areas

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Fingerprint Dive into the research topics of 'Determination of the zero-position for an optical angle sensor'. Together they form a unique fingerprint.

Cite this