Determination of interface fracture toughness in thermal barrier coating system by blister tests

Y. C. Zhou, T. Hashida, C. Y. Jian

Research output: Contribution to journalArticlepeer-review

30 Citations (Scopus)

Abstract

The theoretical model for the blister test method was used to analyze the interface fracture toughness of zirconia coating deposited on an SUS304 stainless steel substrate by a plasma-spraying method. The elastic parameters of the debonded coating were determined by testing the oil pressure q and maximum deflection w(0). SEM observation, compliance method and ultrasonic detection were used to determine the radius of the debonded coating. The three methods gave the same results for the debonded coating radius. Micro-observations showed that the interfacial crack propagates by the growth of voids or microcracks ahead of the main crack and coalescence with the main crack. The energy release rate G0 with phase angle Ψ= 0 for type A coating and type B coating was, respectively, 14.54-25.88 J/m2 and 11.88-16.21 J/m2. The corresponding interface fracture toughness for type A TBC coating and for type B TBC coating is, respectively, 0.77-1.02 MPa·m1/2 and 0.52-0.61 MPa·m1/2. The stable phase angle was approximately -31.5° and -30.2° for coating A and coating B, respectively.

Original languageEnglish
Pages (from-to)176-182
Number of pages7
JournalJournal of Engineering Materials and Technology, Transactions of the ASME
Volume125
Issue number2
DOIs
Publication statusPublished - 2003 Apr 1

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Determination of interface fracture toughness in thermal barrier coating system by blister tests'. Together they form a unique fingerprint.

Cite this