Determination of fluoride using ion-selective electrodes in the presence of aluminum

Siqingaowa Borjigin, Yuuta Ashimura, Toshiaki Yoshioka, Tadaaki Mizoguchi

Research output: Contribution to journalArticlepeer-review

11 Citations (Scopus)

Abstract

We describe a method for determining fluoride with ion-selective electrodes (ISEs). Tartrate and Tris-based total ionic strength adjustment buffers (TISABs) were found to lower the interference from aluminum to a greater extent than conventional citrate-based TISABs. We adopted a solid TISAB addition method that is simple to perform, and can be carried out without lowering the level of fluoride. The apparent recovery of fluoride was 95% or higher, even at 500 mg L -1 of Al 3+ when a tartrate and Tris-based TISAB was used. Interferences from common ions were not observed at 100 mg L -1 levels. We determined the fluoride content in solid silicate samples with ISEs without preliminary steam distillation after alkali fusion processing. Adding a solid TISAB mixture consisting of tartaric acid, sodium tartrate, and Tris, however, eliminated any interference from high levels of aluminum and sodium and potassium carbonates. The proposed analytical method was also applied to the determination of fluoride in geochemical reference samples.2009

Original languageEnglish
Pages (from-to)1437-1443
Number of pages7
Journalanalytical sciences
Volume25
Issue number12
DOIs
Publication statusPublished - 2009 Dec

ASJC Scopus subject areas

  • Analytical Chemistry

Fingerprint Dive into the research topics of 'Determination of fluoride using ion-selective electrodes in the presence of aluminum'. Together they form a unique fingerprint.

Cite this