Desulfurization performance of sorbent derived from waste concrete

Atsushi Iizuka, Akihiro Yamasaki, Yukio Yanagisawa

    Research output: Contribution to journalArticlepeer-review

    4 Citations (Scopus)

    Abstract

    This study examines the desulfurization performances of a sorbent derived from waste concrete through thermal gravimetric analysis in the temperature range from 303 to 1173 K. The sorbent is fine particles having a mean diameter distribution of 10-200 μm generated as a byproduct in a recycling process of aggregates from waste concrete. The sorbent is mainly composed of hydrated cement component, i.e. calcium silicate hydrate (C-S-H) and calcium hydroxide (Ca(OH)2). The sorbent showed SO2 removal activity over the temperature range studied. The desulfurization rate was lower under a lower temperature range up to 773 K, where the desulfurization rate gradually decreased with increasing temperature. The desulfurization activity at the lower temperatures can be attributed to the direct reaction of SO2 with C-S-H and Ca(OH)2. For the higher temperature range, the desulfurization rate was much higher, being almost half that for pure calcium carbonate, a conventional sorbent for dry desulfurization.

    Original languageEnglish
    Pages (from-to)746-749
    Number of pages4
    JournalJournal of Chemical Engineering of Japan
    Volume44
    Issue number10 SPEC. ISSUE
    DOIs
    Publication statusPublished - 2011 Nov 23

    Keywords

    • Dry flue gas desulfurization
    • Waste cement
    • Waste concrete

    ASJC Scopus subject areas

    • Chemical Engineering(all)
    • Chemistry(all)

    Fingerprint Dive into the research topics of 'Desulfurization performance of sorbent derived from waste concrete'. Together they form a unique fingerprint.

    Cite this