Design Study of a 10-T REBCO Insert Solenoid

F. Borgnolutti, A. Badel, T. Benkel, X. Chaud, F. Debray, P. Fazilleau, T. Lecrevisse, P. Tixador

Research output: Contribution to journalArticle

7 Citations (Scopus)

Abstract

As a first step to develop HTS insert technology, we plan to build a 10-T REBCO solenoid that will be tested at the French National High Magnetic Field Laboratory of Grenoble in France (LNCMI) at 4.2 K, in the aperture of a 20-T resistive magnet. Two winding approaches are being considered for the HTS insert, i.e., the no-insulation (NI) and metallic insulation (MI) winding technics. Both methods allow turn-to-turn bypassing current but differ in their turn-to-turn resistance value by three orders of magnitude. In this paper, we provide a comparative study between the two winding options using numerical simulations applied to a preliminary design of the insert, which features a cold bore diameter of 50 mm and is made of 15 double-pancake coils wound from a 6-mm REBCO tape.

Original languageEnglish
Article number7384727
JournalIEEE Transactions on Applied Superconductivity
Volume26
Issue number4
DOIs
Publication statusPublished - 2016 Jun
Externally publishedYes

Keywords

  • HTS
  • High magnetic field
  • Insert solenoid
  • REBCO

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Design Study of a 10-T REBCO Insert Solenoid'. Together they form a unique fingerprint.

  • Cite this

    Borgnolutti, F., Badel, A., Benkel, T., Chaud, X., Debray, F., Fazilleau, P., Lecrevisse, T., & Tixador, P. (2016). Design Study of a 10-T REBCO Insert Solenoid. IEEE Transactions on Applied Superconductivity, 26(4), [7384727]. https://doi.org/10.1109/TASC.2016.2518810