Design of Grain Oriented Microstructure by the Monte Carlo Simulation of Sintering and Isotropic Grain Growth

Hiroshi Itahara, Hiroshi Nomura, Toshihiko Tani, Hideaki Matsubara

Research output: Contribution to journalArticle

7 Citations (Scopus)

Abstract

Fabrication of dense and highly textured ceramics is significantly important for the improvement of their anisotropic properties by the templated grain growth (TGG) method. Monte Carlo simulation based on the Potts model was carried out through, computation for the design of TGG processing, in which anisometric template particles are mixed with fine matrix particles and organic binder and aligned by tape casting before heat treatment. Thus, four initial parameters affecting the microstructure after sintering with isotropic grain growth were investigated; 1) mixing ratio of template/matrix particles, 2) size and 3) aspect ratio of the template particles, and 4) initial porosity (caused by the removal of binder). The fraction of oriented grains in the simulated micro structure was found to increase with increasing template/matrix mixing ratio and aspect ratio of template, and with decreasing template size and initial porosity. The residual porosity was shown to decrease with decreasing template/matrix mixing ratio and template size, and with decreasing initial porosity. The study suggests that computational design would give a guiding principle in terms of the initial preparation conditions for the ceramics having both a large fraction of oriented grains and low residual porosity.

Original languageEnglish
Pages (from-to)548-554
Number of pages7
JournalJournal of the Ceramic Society of Japan
Volume111
Issue number1296
DOIs
Publication statusPublished - 2003 Aug

Keywords

  • Computer simulation
  • Isotropic grain growth
  • Templated grain growth
  • Textured ceramic

ASJC Scopus subject areas

  • Ceramics and Composites
  • Chemistry(all)
  • Condensed Matter Physics
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Design of Grain Oriented Microstructure by the Monte Carlo Simulation of Sintering and Isotropic Grain Growth'. Together they form a unique fingerprint.

  • Cite this