Design and Testing of a Micro-thermal Sensor Probe for Nondestructive Detection of Defects on a Flat Surface

Yuki Shimizu, Yuki Matsuno, Yuan Liu Chen, Hiraku Matsukuma, Wei Gao

Research output: Contribution to journalArticlepeer-review

8 Citations (Scopus)

Abstract

This paper presents a design and testing of a micro-thermal sensor probe for realizing the proposed concept of non-contact surface defect detection, in which a change in heat flow across the gap between the tip of the micro-thermal sensor probe and a target surface is utilized to recognize the existences of surface defects. In the proposed concept of surface defect detection, the probe tip, where the micro-thermal sensor is embedded, is required to be placed as close as possible to the target surface for highly sensitive surface defect detection. For the purpose, an optical tilt detection assembly based on the laser autocollimation is designed to detect relative tilt of the micro-thermal sensor with respect to a target surface. A sensor probe assembly, in which the fabricated micro-thermal sensor is embedded to the tip of a hollow-shaped piezoelectric actuator by using a homemade sensor mount, is also designed in such a way that the sensor element will face to a target surface. A prototype micro-thermal sensor probe is constructed by integrating the optical tilt detection assembly and the sensor probe assembly, and some experiments have been carried out to verify the basic performances of the prototype micro-thermal sensor probe.

Original languageEnglish
Pages (from-to)45-57
Number of pages13
JournalNanomanufacturing and Metrology
Volume1
Issue number1
DOIs
Publication statusPublished - 2018 Mar 1

Keywords

  • Heat flow
  • Micro-thermal sensor
  • Optical angle sensor
  • Surface defect

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering
  • Mechanical Engineering
  • Materials Science (miscellaneous)

Fingerprint

Dive into the research topics of 'Design and Testing of a Micro-thermal Sensor Probe for Nondestructive Detection of Defects on a Flat Surface'. Together they form a unique fingerprint.

Cite this