Design and cooling properties of high stable field REBCO superconducting magnet for MRI

Shoichi Yokoyama, Takanobu Kiss, Daisuke Miyagi, Makoto Tsuda, Taketsune Nakamura, Yasuyuki Shirai, Hideaki Miura, Tetsuya Matsuda, Tatsuya Inoue, Yusuke Morita, Ryo Eguchi, Shunsuke Otake, Hajime Tanabe, Shinji Sato

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Research and development for the practical application of a medical-use magnetic resonance imaging system (MRI) superconducting magnet that does not require liquid helium started as the New Energy and Industrial Technology Development Organization's (NEDO) supported project in fiscal 2016. Development of a liquid helium-free medical MRI superconducting magnet has been desired. Another purpose is to reduce the size and weight of high magnetic field magnets. By using the high temperature superconducting coil, it is possible to make the 3T magnet of the same shape, weight, leakage magnetic field as 1.5T magnet. In this project, we are developing a half size active shield-type 3T REBCO coil for MRI. This magnet has active shield coils with a maximum diameter of 1200 mm, and its room bore diameter is 480 mm. This magnet is one of the world's largest magnets using a REBCO wire with an accumulated energy of 1.6 MJ at the rated magnetic field. It generates a magnetic field of high homogeneity and stability necessary for imaging. In this paper, we report the half-size active shield-type 3T coil and its cooling system that can reduce the initial cooling time by thermal switches.

Original languageEnglish
Article number9000570
JournalIEEE Transactions on Applied Superconductivity
Volume30
Issue number4
DOIs
Publication statusPublished - 2020 Jun

Keywords

  • field homogeneity
  • field stability
  • high-temperature superconducting (HTS)
  • liquid helium free
  • magnetic resonance imaging (MRI)
  • REBCO coil
  • Superconducting magnet

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Design and cooling properties of high stable field REBCO superconducting magnet for MRI'. Together they form a unique fingerprint.

  • Cite this

    Yokoyama, S., Kiss, T., Miyagi, D., Tsuda, M., Nakamura, T., Shirai, Y., Miura, H., Matsuda, T., Inoue, T., Morita, Y., Eguchi, R., Otake, S., Tanabe, H., & Sato, S. (2020). Design and cooling properties of high stable field REBCO superconducting magnet for MRI. IEEE Transactions on Applied Superconductivity, 30(4), [9000570]. https://doi.org/10.1109/TASC.2020.2973936