Densification energy during nanoindentation of silica glass

Keiichi Suzuki, Yasuhiko Benino, Takumi Fujiwara, Takayuki Komatsu

Research output: Contribution to journalArticlepeer-review

24 Citations (Scopus)

Abstract

Load/unload displacement curves at room temperature (humidity 49%) for silica glass have been measured in the penetration range of 0.5-1.2 μm using a Vickers nanoindentation technique (load/unload speed 50 mN/s). Deformation energies have been estimated for the first time. The universal (dynamic) hardness, Hu, and elastic recovery, ER, at the penetration depth, ht, of 1.0 μm are Hu = 4.1 GPa and ER = 0.7. The following energies for total deformation, Ut, elastic deformation, Ue, and plastic deformation (i.e., densification during loading), Up, are obtained: Ut=190, Ue=135 and Up = 55 kJ/mol at ht = 0.5 μm and Ut = 139, Ue = 96 and Up = 43 kJ/mol at ht = 1.0 μm. All these deformation energies increase with decreasing penetration depth. It is found that plastic deformation energies of 38-55 kJ/mol for 0.5 < ht < 1.2 μm are very close to the activation energy (46-54 kJ/mol) for the recovery of densification in silica glass, but are very small compared with the single bond strength (443 kJ/mol for Si-O bond) of SiO2.

Original languageEnglish
Pages (from-to)3102-3104
Number of pages3
JournalJournal of the American Ceramic Society
Volume85
Issue number12
DOIs
Publication statusPublished - 2002 Dec
Externally publishedYes

ASJC Scopus subject areas

  • Ceramics and Composites
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Densification energy during nanoindentation of silica glass'. Together they form a unique fingerprint.

Cite this