Demonstration of detection of the multiple pipe wall thinning defects using microwaves

Takuya Katagiri, Guanren Chen, Noritaka Yusa, Hidetoshi Hashizume

Research output: Contribution to journalArticlepeer-review

Abstract

In this study, the applicability of a nondestructive method using microwaves to the detection of multiple pipe wall thinning defects was investigated. In numerical simulation, a single full circumferential defect was introduced into a straight pipe of 19 mm inner diameter, and the effect of the defect on transmitted waves was investigated. The transmitted energy ratio of the TM01 mode to the emitted wave was found to be 93% in average even in the presence of a 1-mm depth thinning. After that, experimental measurements were performed using a flanged brass tube with two artificial thinning defects. By applying signal processing to the measured S-parameters, clear reflections from the two defects were observed. By comparing the signals, we confirmed that the first full circumferential defect provides at most 12% amplitude attenuation of the reflected signal from the second defect, which should be related to the distance and size of the defects.

Original languageEnglish
Article number109074
JournalMeasurement: Journal of the International Measurement Confederation
Volume175
DOIs
Publication statusPublished - 2021 Apr

Keywords

  • Electromagnetic nondestructive testing
  • Microwaves
  • Multiple defects
  • Pipeline
  • Signal processing

ASJC Scopus subject areas

  • Instrumentation
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Demonstration of detection of the multiple pipe wall thinning defects using microwaves'. Together they form a unique fingerprint.

Cite this